Compatible with all OBDII protocols
More than 15 Built-In Digital Gauges
Check & Clear Trouble Codes
Multiple Trip Computers
X-Gauge Programmable Gauges System
Performance Monitor
Made in USA with 3 Years Warranty
ScanGaugeII can help you monitor your vehicle’s most vital systems and provide the kind of real-time information you’ve been missing. Features include more than 15 built-in digital gauges, X-Gauge feature that allows you to add car make and model dependent gauges like transmission temperature gauge, EGT, DPF soot and many more, 5 sets of trip data and an easy-to-use Scan Tool that shows both set and pending trouble codes — all in an ultra compact design that installs in minutes.
ScanGauge-II provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display 4 gauges at a time, so you can monitor the current operating conditions of your vehicle in real-time.
AVG: Average Fuel Economy
CLSD LP / OPEN LP: Fuel System Loop Status
CPM: Cost Per Mile/KM
FIA / CIA: Intake Air Temperature
FPR: Fuel Pressure
FWT / CWT: Water Temperature
GPH: Gallons Per Hour
LPH: Litres Per Hour
MAP: Manifold Absolute Pressure
BST: Boost
MPG: Miles Per Gallon
KPG: Kilometers Per Gallon
MPL: Miles Per Litres
LHK: Liters Per 100Km
KPL: Kilometeres Per Liter
MPH: Miles Per Hour
KPH: Kilometers Per Hour
RPM: Revolutions Per Minute
TFC: Trip Fuel Cost
TPS: Throttle Position Sensor
VLT: Battery Voltage
IGN: Ignition Timing
LOD: Engine Loading
HPR: Horsepower
*The information available may vary depending on vehicle's make and model. If the information is not available no data will be shown for it. If the same gauge is selected for more than one position, only one of them will show data.
In addition to the standard set of gauges, the ScanGaugeII features the exclusive X-GAUGE™ programmable gauge system; you can monitor parameters such as transmission temperature, trip data and fuel economy information. X-Gauge™ gives you the ability to customise your ScanGaugeII by adding additional vehicle specific digital gauges.
The ScanGaugeII features the all-new Performance Monitor™ for real-time performance measurements. The Performance Monitor gives you the ability to track your vehicle’s performance over short periods of time, distance and acceleration.
With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.
ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:
KM/L / MPG
Fuel Used
Max Coolant Temperature
KMs Driven
Max RPM
Hours Driven
Max KPH
Average KPH
Fuel Cost
The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.
KML / MPG for Current Tank
Fuel Used on Current Tank
Tank to Empty
Distance to Empty
Distance Until Empty
Hours Driven on Current Tank
Hours to Empty
Average Speed
Fuel Used Cost
The ScanGauge can check for Engine Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.
Reads Trouble Codes
Clears Trouble Codes
Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)
Turns Off “CHECK ENGINE” Light
Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing
ScanGauge features customisable backlight colour display to match your instrument panel for an integrated look. Use from pre-set colours or use any combinations to design the perfect colour for your preference.
ScanGauge2 unit (latest firmware version 4.52AU)
ScanGauge cable (1.8m)
Velcro tape
User manual
Quick start guide
