ScanGauge 3

Name: ScanGauge 3
Brand: ScanGauge MENA
SKU: SGIII
Price: 1065.0 AED
Availability: OutOfStock
Rating: 5.0 (6 reviews)

Dhs. 1,065.00 AED

This product is unavailable

Upgrade your driving experience with ScanGauge-3, the ultimate companion for your car. Say goodbye to uncertainty and hello to real-time access to critical data that keeps your vehicle running at its best.

With ScanGauge-3, you'll have all the essential information right at your fingertips. Monitor crucial metrics like coolant temperature, intake temperature, oil temperature, and transmission temperature. Stay informed about boost, air/fuel ratio, speed, fuel consumption, and so much more. No more guesswork—ensure your car is performing at optimum levels.

What sets ScanGauge-3 apart is its exclusive x-gauge feature. Unlock a wide range of gauges that surpass any other OBD2 gauge on the market. Customise your dashboard to display the gauges that matter most to you. And with the added convenience of setting alarms for critical gauges, you'll be instantly alerted when attention is needed.

But that's not all. ScanGauge-3 goes beyond monitoring to offer advanced capabilities. It empowers you to read and clear engine diagnostic trouble codes. Stay ahead of potential issues and avoid costly repairs. With ScanGauge-3, you'll have peace of mind knowing your car's health is in your hands.

Upgrade your driving experience today with ScanGauge-3. Maximise performance, optimise fuel efficiency, and stay on top of your vehicle's well-being. Don't settle for less when you can have the power of ScanGauge-3. Drive with confidence, drive with ScanGauge-3.

Main Features

Compatible with all OBDII protocols

Capacitive Touch Display with over 16 million colours

More than 15 Built-In Digital Gauges

Check & Clear Trouble Codes

Multiple Trip Computers

Automatic X-Gauge Configuration

Customisable Visual & Audible Alarms

Up to 9 Gauges Displayed at Once with Multiple Pages of Favourites

Free Wireless Updates

Made in USA with 3 Years Warranty

Better than you think

I have 2 of scangage 3 in my land cruiser 4.0 v6 gas and the other one v8 . Scangage give me alot of information helps me in my overland or trip about gas mileage in Heavy load in the other hand give me accurate number of engine coolant temperature and transmission and give me warning as i adjusted by me

Nice work!

الجهاز ممتاز جدا ومفيد جدا ومعطيني جميع القريات على جي ام سي سييرا انصح بالشراء منهم بكل امانه لكل شخص مهتم في سيارته هذا الجهاز يفيدك كثير

بخصوص القيج

انا معي سياره جي ام سي سييرا معطيني اهم القرايات وتقريبا جميعها جدا ممتاز ومفيد جدا وانصح به وسرعه التوصيل ممتازه اخذ ٤ الى ٥ ايام الى قطر

Great Product

Using the Scangauge 3 as an addition to my current gauge setup.
The Handling is easy and the software works smooth. On my wishlist for a future version would be more customisation options for the layout (custom themes).

Great device

This gives more gauges than any other obd2 device. accurate and easy to use.

1 2

ScanGauge-III

ScanGauge-3 can help you monitor your vehicle’s most vital systems and provide the kind of real-time information you’ve been missing. Features include built-in digital gauges, 5 sets of trip data and an easy-to-use Scan Tool that shows both set and pending trouble codes — all in an ultra compact design that installs in minutes.

Digital Gauges

ScanGauge-III provides real-time gauges to show you what is going on “under the hood” with more than 15 built-in digital gauges. The gauge screen allows you to select and display up to 9 gauges at a time with multiple pages of favourites, so you can monitor the current operating conditions of your vehicle in real-time.
OBD2 Gauges

AVG: Average Fuel Economy
CLSD LP / OPEN LP: Fuel System Loop Status
CPM: Cost Per Mile/KM
FIA / CIA: Intake Air Temperature
FPR: Fuel Pressure
FWT / CWT: Water Temperature
GPH: Gallons Per Hour
LPH: Litres Per Hour
MAP: Manifold Absolute Pressure
BST: Boost
MPG: Miles Per Gallon
KPG: Kilometers Per Gallon
MPL: Miles Per Litres
LHK: Liters Per 100Km
KPL: Kilometeres Per Liter
MPH: Miles Per Hour
KPH: Kilometers Per Hour
RPM: Revolutions Per Minute
TFC: Trip Fuel Cost
TPS: Throttle Position Sensor
VLT: Battery Voltage
IGN: Ignition Timing
LOD: Engine Loading
HPR: Horsepower
*The information available may vary depending on vehicle's make and model. If the information is not available no data will be shown for it. If the same gauge is selected for more than one position, only one of them will show data.

4X4 Accessories Scan Gauge 3 X-Gauge Auto Gauges

Exclusive X-GAUGE™️ Feature

In addition to the standard set of gauges, the ScanGaugeIII features the exclusive X-GAUGE™ programmable gauge system; you can scan available additional sensors for your car and monitor parameters such as transmission temperature, trip data and fuel economy information. X-Gauge™ gives you the ability to customise your ScanGaugeII by adding additional vehicle specific digital gauges.

Learn More

Trip Computers

With five built-in trip computers, the ScanGauge can keep track of everything from fuel cost to distance traveled and everything in between. Data is stored on the ScanGauge and is retained even when the power is disconnected. Each trip computer starts automatically and information is available anytime during the trip.
Time & Distance Trip Computer

ScanGauge includes three trip computers based on time and distance. They include the Current Trip, Today Trip and Previous Day Trip. Each trip computer starts automatically and tracks the following parameters:
KM/L / MPG
Fuel Used
Max Coolant Temperature
KMs Driven
Max RPM
Hours Driven
Max KPH
Average KPH
Fuel Cost
Fuel & Tank Trip Computer

The ScanGauge includes two trip computers based on the current tank of fuel. They include the Current Tank and Tank to Empty. Each trip computer starts automatically when you tell ScanGauge you have filled your tank.
KML / MPG for Current Tank
Fuel Used on Current Tank
Tank to Empty
Distance to Empty
Distance Until Empty
Hours Driven on Current Tank
Hours to Empty
Average Speed
Fuel Used Cost

OBD Scan Tool Engine Code Reader ScanGauge 3

OBD2 Code Reader

The ScanGauge can check for Engine Diagnostic Trouble Codes (DTCs) and if found, can display how many there are and the Trouble Codes themselves with their meaning. Using the internet or repair manuals, these can be translated to the failed component and repairs can be made.

Reads Trouble Codes

Clears Trouble Codes

Shows Conditions When Trouble Was Detected (RPM, COOLANT, TEMP etc)

Turns Off “CHECK ENGINE” Light

Shows When Onboard Tests Have Been Completed And Vehicle Is Ready To Pass OBDII emissions Testing

Customisable Colour Backlight Display

ScanGauge features customisable backlight colour display to match your instrument panel for an integrated look. Use from pre-set colours or use any combinations to design the perfect colour for your preference.